Rebuildable Atomisers (Rba’s, Rda’s & Sub Ohm Tanks
Quick OverviewThe highly sought after Magma RDA by Paradigm has been cloned. Brought to by Infinite this is a unique RDA design that challenges the “standard” three post layout that most RDA’s tend to use today. RDA’s have seen a lot of attempts at rebuilding the wheel, but many will argue that the Magma is the standout in form and functionality.Learn More
Two nicely bored out posts that direct the coil right over the bottom feeding air flow channels. The AFC (Air Flow Control) ring has everything from dual 1mm up to dual 3mm are available to suit a variety of tastes. There is a deep juice well so you have a bit of reserve juice for those times you can't drip.
22mm Wide – standard size of MOD’s to make it look “flushed”
Two 3mm wide poles (Screw type – shoot and screw) easier to rebuild and better conductivity
New technology – dual DIRECT TO COIL airhole (around 1.5mm away from coils) for maximized flavor and vapor
External airflow selection (1mm, 2mm, 3mm), options for single or dual airhole – for ease of use
Extended juice basin – can hold up to 40 drops of juice with minimal chance of leakage (for a dripper)
Poles are welded to the base for durability
Positive insulator hidden in the base to avoid melting
O-ring less – to make it maintenance free
Dome chamber top cap for better flavor
Comes with a mini screwdriver
Now $21.90Quick Overview The Plume Veil v1.5 Clone by Icloud cig is now available! The new Plume Veil v1.5 clone from Icloud cig features 5 airflow holes on top of the cap, a slightly bigger juice well, larger cyclops hole, a different logo, and a non gold plated deck. Includes: 1x Plume Veil v1.5 Clone by Icloud cig 1x Bag of Screws, O-Rings, Wick and Wire Learn More
Quick OverviewHcigar Hammer Mod CloneLearn More
The HCigar Hammer mod clone also known as the "Chammer," is a beautifully designed 1:1 ratio unit weighing at just 320g (11.1ounces). Made from full stainless steel, the mod includes a 2pc tube to use with either a 18350, 18650 or 18490 battery size. The mod also has intricate laser etched design logos and individual numbering for added appeal.
**We suggest on 18350 battery sizes to use flat top versions for better fitment.
1:1 ratio clone
Full 316 stainless steel
Quick OverviewKanger Toptank Mini clearomizerLearn More
Material: Stainless steel and glass
Support RBA mini plus
Filling on the top
22mm base diameter
Size: 22 x 22 x 45mm
Type: Tank Atomiser
Available Colours : Red, Silver, Black, White
Material : Stainless steel, Glass
Thread Type: 510
Overall Diameter: 22mm
Tank Capacity : 4.0ml
Avaliable Heater Core: Normal Coil
Resistance : 0.5ohm
Dimension and Weight
Product weight : 0.060 kg
Package weight : 0.150 kg
Product size (L x W x H) : 2.2 x 2.2 x 4.5 cm / 0.86 x 0.86 x 1.77 inches
Package size (L x W x H) : 4.2 x 6 x 9.5 cm / 1.65 x 2.36 x 3.73 inches
Package Contents: 1 x Kanger Toptank Mini Atomiser
Quick OverviewOur Kanthal wire is some of the best quality wire you will find! If you haven't tried it in your build yet, you are missing out!Learn More
Melting point °C - 1500
Max continuous operating temperature in air °C - 1400
Magnetic properties - The material is magnetic up to approximately 600°C (Curie point).
Emissivity - fully oxidized material - 0.70
AWG, Diameter (mm), Ohms/ft, Largest Spool Denomination:
16 AWG - 1.29mm - 0.33 - 50'
18 AWG - 1.02mm - 0.67 - 100'
20 AWG - 0.81mm - 0.81 - 50'
21 AWG - 0.72mm - 1.07 - 50
22 AWG - 0.64mm - 1.31 - 100'
23 AWG - 0.57mm - 1.71 - 100'
24 AWG - 0.51mm - 2.04 - 100'
25 AWG - 0.45mm - 2.72 - 200'
26 AWG - 0.40mm - 3.21 - 250'
27 AWG - 0.36mm - 4.32 - 250'
28 AWG - 0.32mm - 5.27 - 250'
29 AWG - 0.28mm - 6.88 - 250'
30 AWG - 0.25mm - 8.36 - 250'
31 AWG - 0.22mm - 10.94 - 250'
32 AWG - 0.20mm - 13.75 - 250'
34 AWG - 0.16mm - 21.1 - 250'
Quick OverviewVapor Kings Nichrome 80 Resistance wire is perfect for rebuilding your atomiser, and especially good for sub ohm coil builds. It has a lower resistance per length compared to kanthal, which means that it will heat up noticeably faster and is a preferred alternative to kanthal for many cloud chasers for this reason.Learn More
Melting point °C - 1350
Max continuous operating temperature in air °C - 1200
AWG, Diameter(mm), Ohms/ft, Largest Spool Denomination:
16 AWG - 1.29mm - 0.259 - 50'
18 AWG - 1.02mm - 0.418 - 100'
20 AWG - 0.81mm - 0.652 - 50'
22 AWG - 0.64mm - 1.036 - 100'
24 AWG - 0.51mm - 1.64 - 100'
26 AWG - 0.40mm - 2.657 - 250'
28 AWG - 0.32mm - 4.08 - 250'
30 AWG - 0.254mm - 6.76 - 250'
32 AWG - 0.20mm - 10.58 - 250'
36 AWG - 0.127mm - 26 - 250'
38 AWG - 0.1007mm - 40.62 - 250'
40 AWG - 0.0799 mm - 67.63 - 250